Laboratory Testing Machines, Equipments and Instruments — Complete Testing Lab Solutions Manufacturer in India

International Equipments is one of India's leading manufacturers, suppliers and exporters of Laboratory Testing Machines, Equipments and Instruments — covering the complete spectrum of mechanical, thermal, physical, rheological and compositional testing needs across the plastics, polymers, film, flexible packaging, pipe, rubber, adhesive and engineering materials industries. Built at our Mumbai facility since the 1970s and exported to over 50 countries, our equipment is installed in the QC and R&D laboratories of polymer producers, master-batch compounders, plastic and rubber processors, automotive component manufacturers, FMCG / dairy / food packaging companies, government testing labs, BIS-accredited test houses, premier research institutions (including CIPET) and engineering colleges across India and worldwide.

This page is the master discovery hub for our complete laboratory testing equipment range. From the cornerstone Universal Testing Machine and Melt Flow Index Tester through to the specialised Hydrostatic Pressure Testing Panel, Dart Impact Tester, Izod / Charpy Impact Tester, VSP / HDT Apparatus and 25+ other dedicated testing instruments — we manufacture the complete laboratory under one roof in Mumbai. Use the category links below to navigate to the specific testing area relevant to your industry, or browse the featured instruments and complete product list further down this page.

About International Equipments — Pioneers Since the Seventies

International Equipments on its legacy of expanding by manufacturing Quality, Reliable and Consistent Laboratory Testing Equipments, Instruments, Machines & complete Testing Lab Solutions; with introducing ground breaking technologies at economical price.

In the Seventies Decade, when people were not even aware of Material Testing Equipment We Pioneered the indigenous Melt Flow Index Tester in India.

We rapidly expanding advanced manufacturing capabilities and boosting not only Indian Market but also with Global presence to meet surging customer demands.

We Export to more than 50 Countries Like Mexico, US, Canada, Australia, Brazil, Saudi Arabia, Africa Etc.

With a vision of serving customers / consumers with Quality, Accuracy, Reliability, Consistency and affordability; We are proud in building an exhaustive & extensive Client List on that tradition and our Team is accelerating their efforts in standardizing production for Customized Requirements of every customer for every industry which makes more flexible and introduce advanced technology to efficiently build the best possible product at the best value.

Our Core Principles

• Quality

• Accuracy

• Consistency

• Reliability

• Economy

• 24X7 - Quality Support

Our Complete Product Range (6 Major Categories)

Our complete laboratory testing equipment range is organised into six major categories. Each category page provides a focused view of the instruments most relevant to that industry segment:

Plastic Testing Equipments

The master plastic-industry category — 27+ instruments covering tensile, impact, thermal, rheological and physical testing for injection moulders, blow moulders, extruders and plastic processors. The single most comprehensive plastic-industry equipment list.

Film Testing Equipments

Specialised category for plastic film, flexible packaging laminate, shrink/stretch wrap and adhesive tape manufacturers. Covers Tensile, Dart Impact, COF, Heat-Seal + Peel, GSM, Opacity and other film-specific tests per ASTM D 882, D 1709, D 1894.

Material Testing Equipments

The broadest engineering category — mechanical, thermal and physical testing for general materials science applications. Includes UTM, Tensile Tester, Izod/Charpy, VSP/HDT, MFI and supporting instruments. Used by educational institutions, R&D labs and multi-material manufacturers.

Polymers Testing Equipments

R&D-focused category for polymer producers, master-batch compounders, engineering plastic moulders and research institutions. Covers engineering plastics (ABS, PC, PA, POM, SAN), high-performance polymers (PEKK), glass-filled composites and master-batch. Trusted by Toyota, Fiat, Volkswagen, Exide, CIPET.

Pipe Testing Equipments

Specialised category for HDPE, PVC, CPVC, PPR, MDPE and PE gas pipe manufacturers. Covers the central Hydrostatic Pressure Panel + SS Tank + End Caps system, plus Impact Tester for Pipes, OIT, Carbon Black, ESCR and supporting instruments per IS 4984, IS 4985, IS 14930, ISO 1167.

Rubber Testing Equipments

Specialised category for rubber and elastomer manufacturers — tensile (ASTM D 412), heat ageing, ash content, density and supporting tests for natural rubber, synthetic rubber, TPE, TPV and rubber compounds.

Featured Laboratory Testing Machines & Instruments

Melt Flow Index Tester

The single most-used polymer QC test — characterises molten-polymer flow per ASTM D 1238 / ISO 1133. Available in Manual, Auto-cut and Fully Computerised variants. Our pioneering 1970s product that started the company.

Universal Testing Machine (UTM)

The cornerstone mechanical-testing instrument — handles tensile, compression, flexural, peel and many other tests on a single multi-purpose machine per ASTM D 638, D 695, D 790, ISO 527. Twin-column computerised with PC software.

Tensile Testing Machine (Single Screw)

Economical single-screw tensile tester for routine tensile and elongation testing of films, sheets, dumbbells and rubber specimens per ASTM D 638, D 882, D 412. Ideal where the full UTM multi-test capability is not needed.

Izod / Charpy Impact Tester

Computerised pendulum impact tester per ASTM D 256, D 6110 and ISO 180. The key toughness measurement for engineering plastics and glass-filled composites.

VSP / HDT Apparatus

Computerised and Analogue variants for Vicat Softening Point and Heat Deflection Temperature per ASTM D 1525 / D 648 and ISO 306 / 75. Defines maximum service temperature of thermoplastics.

Static & Kinetic Friction Tester (COF)

Two-variant product page covering horizontal-plane COF Tester (ASTM D 1894 for plastic film) and inclined-plane COF Tester (TAPPI T-815 for paper and corrugated). Critical for flexible packaging converting.

Hydrostatic Pressure Testing Panel

8-station computerised hydrostatic pressure panel with hydro-pneumatic pump and PC data logging. The central pipe certification instrument per IS 4984, IS 4985, ISO 1167. Pairs with the SS Tank and End Caps.

Dart Impact Tester

Vertical falling-dart impact tester for plastic film per ASTM D 1709 and IS 2508. 2 darts (Method A + Method B), electromagnetic release, vacuum film clamping, 5g-500g weight set.

Digital Hot Air Oven

Precision laboratory oven (ambient to 250°C) for sample conditioning, de-moisturization of polymers. A general-purpose workhorse in every testing lab.

Oxidation Induction Tester (OIT)

DTA-based OIT apparatus per ASTM D 3895 for HDPE, MDPE and PP polyolefins. Verifies antioxidant content and long-term thermal stability. Mandatory for HDPE pipe and PLB duct ISI mark certification.

Digital Peel Tester

Dedicated peel and bond-strength tester per ASTM standards. Equipment comes with

E.S.C.R. Apparatus

Environmental Stress Cracking Resistance per ASTM D 1693. Critical for HDPE water pipes, PLB ducts and detergent bottles — verifies the polymer's resistance to crack initiation under sustained stress in surfactant exposure.

Categories of Laboratory Testing We Cover

Our complete testing-equipment range spans 11 broad categories of laboratory testing — covering the full property spectrum of plastics, polymers, films, pipes, rubber and engineering materials:

Mechanical Testing — Tensile, Compression, Flexural, Peel, Bond

Universal Testing Machine (UTM), Single Screw Tensile Tester, Adhesives / Ceramic Tile UTM, Digital Peel Tester — covering the full mechanical-property range from low-load thin-film tensile through to high-load engineering-plastic flexural and adhesive bond strength.

Impact Testing — Multiple Specialised Instruments

Izod / Charpy Impact Tester (for notched specimens, engineering plastics), Dart Impact Tester (for plastic film), Impact Tester for Pipes (drop-weight for whole pipe samples), Seat Impact Tester and Back Punch Impact Tester (for plastic furniture) — plus the Motorized Notch Cutter and Micro-meter Jig that support Izod/Charpy specimen preparation.

Thermal Testing — VSP, HDT, OIT, Ash Content

Computerised VSP / HDT Apparatus (Vicat Softening Point + Heat Deflection Temperature), OIT Apparatus (Oxidation Induction Time), Muffle Furnace (Ash Content), Hot Air Oven (heat ageing and conditioning), Zero Degree Chamber (low-temperature pre-conditioning).

Rheological Testing — Melt Flow Index

Melt Flow Index Tester (Manual, Auto-cut and Fully Computerised variants) — the foundation rheological QC instrument and our pioneering 1970s product.

Pressure & Burst Testing — Hydrostatic

Computerised 8-Station Hydrostatic Pressure Testing Panel, SS Tank for Hydrostatic Pressure Testing (200-5000 litre), SS End Caps (16-450 mm OD) — the complete three-component pipe pressure-testing system per IS 4984 / IS 4985 / ISO 1167.

Friction & Surface Testing — COF

COF Tester product page covering both horizontal-plane ASTM D 1894 (for plastic film) and inclined-plane TAPPI T-815 (for paper and corrugated) — most film QC labs need both methods.

Optical & Physical Testing — Opacity, Density, GSM, Moisture

Digital Opacity Tester, Digital Density Apparatus, Digital GSM Weighing Balance, Moisture Analyser — the routine physical-property and incoming-material QC instruments.

Polymer Compositional Analysis — Carbon Black

Carbon Black Content Apparatus (pyrolysis per ASTM D 1603), Carbon Black Dispersion Tester (microscope grading per ISO 18553) — paired together for the complete carbon-black QC story required for HDPE pipe and PLB duct.

Environmental Testing — ESCR & Zero Degree Chamber

E.S.C.R. Apparatus (Environmental Stress Cracking Resistance per ASTM D 1693), Digital Zero Degree Chamber (0°C pre-conditioning for low-temperature impact testing).

Seal Strength Testing — Heat Sealer + Peel Tester

Heat Sealer + Digital Peel Tester matched pair for the ASTM seal-strength workflow — foundation seal-strength testing for any flexible packaging QC lab.

Sample Preparation — Cutting & Notching

Hydraulic Press (sample cutting press with dies), Contour Cutter (powered template cutting for complex shapes), Motorized Notch Cutter + Micro-meter Jig (for Izod/Charpy specimens).

Industry Landing Pages

We also maintain dedicated industry landing pages covering specific customer segments — useful when you want focused guidance on the testing equipment package suited to your industry:

Testing Equipment for Plastic Pipe Manufacturers

Water pipe, gas pipe and sewerage pipe focused — HDPE, PVC, CPVC, PPR. Centred on the IS 4984 / IS 4985 hydrostatic + impact test methodology.

Testing Equipment for HDPE PLB Duct Manufacturers

Telecom cable-ducting focused — DOT / IS 14930 compliance. Includes the unique internal-COF test for PLB duct cable-blowing performance verification.

Testing Equipment for Packaging Industry

Flexible packaging, multilayer laminate, retort pouch and FMCG packaging focused. Covers seal strength, GSM, COF, dart impact, peel and shrinkage testing.

Testing Equipment for Yarn, Woven Sacks, Tapes & Fabrics

Yarn, raffia tape, woven sack and technical fabric focused — tensile, elongation, GSM and dimensional testing.

Testing Equipment for Recycled Plastics

Recycled polymer compound focused — full re-qualification testing for recycled grades including MFI, density, tensile, impact, ash content and moisture.

Test Standards Followed (ASTM, ISO, BIS / IS, DOT)

• ASTM (USA) — D 638, D 695, D 790, D 882, D 1238, D 1525, D 648, D 256, D 6110, D 1709, D 1894, D 1693, D 3895, D 3330, F 88, D 792, D 1603, D 5630, D 412, D 573, D 2732, D 1598 and many more

• ISO (International) — 527, 178, 180, 75, 306, 1133, 1167, 1183, 8295, 3451-1, 9080, 9969, 11357-6, 18553 and many more

• BIS / IS (India) — IS 4984 (HDPE water pipe), IS 4985 (uPVC water pipe), IS 14333 (HDPE sewerage), IS 14885 (PE gas), IS 14930 (HDPE PLB duct), IS 15778 (CPVC), IS 15801 (PPR), IS 12235 (PVC test methods), IS 13360 (plastics test methods), IS 2508 (plastic film), IS 7016 (laminate bond), IS 4360 (chair impact), IS 3400 (rubber methods) and many more

• DOT (Department of Telecommunication, India) — for HDPE PLB telecom duct acceptance testing

• TAPPI (Pulp & Paper) — T-815 (inclined plane COF), and supporting paper / paperboard methods

• BS (British Standards), DIN (German Standards), AS/NZS, JIS (Japan) — selected references for international export

Industries We Serve

• Polymer Producers, Petrochemical Companies & Master-batch Manufacturers

• Engineering Plastic Moulders (ABS, PC, PA / Nylon, POM, SAN)

• HDPE / PVC / CPVC / PPR / MDPE Pipe Manufacturers

• HDPE PLB Telecom Duct Manufacturers

• Plastic Film & Flexible Packaging Manufacturers

• Multilayer Co-Extruded Film, Laminate & Foil Producers

• Shrink Wrap, Stretch Wrap & Adhesive Tape Manufacturers

• Rubber, TPE & Elastomer Manufacturers

• Automotive Component Manufacturers (Toyota, Fiat, Volkswagen supply chains)

• Glass-Filled & Composite Material Manufacturers

• Battery & Electrical Component Manufacturers (Exide and others)

• Defence, Ordnance & Aerospace Establishments (Rifle Factory, Ordnance Factory)

• FMCG, Dairy, Food & Pharmaceutical Packaging Companies (HUL, P&G and others)

• Recycled Plastic Processors

• Yarn, Raffia Tape & Woven Sack Manufacturers

• Telecom Infrastructure Companies (BSNL, BharatNet, Reliance Jio, Airtel)

• Polymer Research Institutes & Universities (CIPET and others)

• Government Testing Labs, NABL Accredited Labs & BIS-Approved Test Houses

• Engineering Colleges, Polytechnics, ITI Institutes & University Material Science Departments

• R&D Centres of Plastic, Polymer, Rubber, Automotive and Chemical Companies

Our Export Markets — Serving 50+ Countries

Our laboratory testing equipment is exported to over 50 countries across all continents. Our customers include polymer producers, plastic processors, pipe manufacturers, flexible packaging converters and government testing laboratories in:

• North America — USA, Canada, Mexico

• Latin America — Brazil and other South American countries

• Middle East — Saudi Arabia and the Persian Gulf region

• Africa — multiple African countries

• Asia-Pacific — Australia, South-East Asia

• Europe — selected European markets

Why Choose International Equipments?

Pioneers in the Indian Market Since the Seventies

We pioneered the indigenous Melt Flow Index Tester in India in the 1970s — when the concept of polymer material testing was barely known in the Indian market. That pioneering legacy of indigenous manufacturing, combined with five decades of customer feedback, drives our continuous product improvement today.

Complete Testing Lab Solutions Under One Roof

From the cornerstone UTM and MFI Tester through to specialised instruments like the Hydrostatic Pressure Panel, OIT Apparatus and Carbon Black Dispersion Tester — we manufacture the COMPLETE testing laboratory from a single Mumbai facility. One supplier, one commissioning team, one training programme.

Exported to 50+ Countries

Our equipment is installed across Mexico, USA, Canada, Australia, Brazil, Saudi Arabia, Africa, the Middle East, Europe and South-East Asia. Proven international reliability in demanding plastic, polymer, rubber and packaging QC environments.

Used by Global Industry Leaders

Our equipment is installed at HUL, P&G, Uflex, Pidilite, Hindalco, Reliance, Finolex, Kimplas, Duraline, Georg Fischer, John Deere, Toyota, Fiat, Volkswagen, Exide, CIPET, Rifle Factory, Ordnance Factory and many more leading Indian and multinational manufacturers, defence establishments and research institutions.

Full Coverage of ASTM, ISO, BIS / IS Standards

Every instrument complies with the relevant ASTM (USA), ISO (international) and BIS / IS (India) test standards — covers domestic, USA-export, European-export and pharmaceutical-export specifications from a single supplier. DOT-acceptance for HDPE PLB telecom duct also covered.

Customised Configurations for Every Customer

Our team standardises production for the customised requirements of every customer in every industry — combining advanced technology with flexible configuration to build the best possible product at the best value. Special configurations for unusual sample geometries, extended ranges or specialised tests are routinely available on request.

Six Core Principles

Quality, Accuracy, Consistency, Reliability, Economy and 24X7 Quality Support — the six principles on which the company was founded and on which it continues to operate. Every product and every customer engagement is held to these standards.

ISO Certified, CE Marked Manufacturing

Designed and built at our Mumbai facility under ISO certified quality systems, with CE marking for export to the Middle East, Africa, South-East Asia, Europe and South America.

Calibration Support

We offer one calibration visit per year, which is sufficient to maintain the accuracy and performance of the equipment. The calibration visit is provided after completion of the initial 1-year warranty period.